Compoflex® SB RF 3

Compoflex® SB RF 3 is a peel ply, release film and flow mesh, used to control flow rate, distribute resin and release consumables from a composite laminate. 

Compoflex® SB RF 3 generates a very rough and textured surface ideal for secondary bonding or painting of a composite laminate. Compoflex® SB may reduce or eliminate the need for sanding or abrading. Best results with epoxy resin, but we always recommend testing. Release film perforation style: Low to medium bleed characteristics 

Compoflex® SB RF 3 is designed to efficiently distribute resin with limited waste due to the low profile and tight construction.Works well with polyester, vinylester, epoxy, phenolic and other types of resin.

Technical data

PropertyCompoflex SB RF 3Standard
Recommended working temperature145°C (293°F) -
Fibre typePolypropylene (nonwoven)/High density Polyethylene (grid) -
Fabric constructionNonwoven-
Weight335 gsmISO 9864
Thickness1.6 mmISO 9863 - 1
Tear resistance MD/CD280 N/188 NISO 9073 - 4
Pore size < 10 μmISO 12956

Notes

Maximum temperature is depending on process and Fibertex always recommends testing prior to use.
Above technical data are indicative.
MD = Machine direction  
CD = Cross direction

Sizes
Width: 1.52 m (45.4 inch)
Length: 61 m (200 ft.)
Packing: 10 rolls per pallet each roll in clear foil 

Rolls can be cut to size maximum width available is 2.1 m (82.9 inch).
* Tear resistance MD/CD is measured without infusion net.

Icon_Composites_blue

Do you want to go back to the product overview?

Product overview

Contact

Find Contact Person

Find a relevant contact person within the composites business area.