Compoflex® RF 3
Compoflex® RF 3 is a peel ply, release film and flow mesh, used to control flow rate, distribute resin and release consumables from a composite laminate.
Compoflex® RF 3 generates a very smooth surface ideal for painting of the composite laminate. For secondary bonding we recommend Compoflex® SB. Release film perforation style: Medium bleed characteristics.
Compoflex® RF 3 is designed to efficiently distribute resin with limited waste due to the low profile and tight construction. Works well with polyester, vinylester, epoxy, phenolic and other types of resin.
Technical data
| Property | Compoflex RF 3 | Standard |
|---|---|---|
| Recommended working temperature | 145°C (293°F) | - |
| Fibre type | Polypropylene (nonwoven)/High density Polyethylene (grid) | - |
| Fabric construction | Nonwoven | - |
| Weight | 335 gsm | EN 965 |
| Thickness | 1.6 mm | ISO 9863 - 1 |
| Tear resistance MD/CD | 280 N/188 N | ISO 9073 - 4 |
| Pore size | < 10 μm | ISO 12956 |
Notes
Maximum temperature is depending on process and Fibertex always recommends testing prior to use.
Above technical data are indicative.
MD = Machine direction
CD = Cross direction
Sizes
Width: 1.52 m (45.4 inch)
Length: 61 m (200 ft.)
Packing: 10 rolls per pallet each roll in clear foil
Rolls can be cut to size maximum width available is 2.3 m (90.8 inch).
* Tear resistance MD/CD is measured without infusion net.
Contact
Find Contact Person
Find a relevant contact person within the composites business area.